Grade 90/130

by Iran Request
2 years قبل
198 Views

General description of bitumen 90/130

Iranrequest bitumen penetration grade 90/130 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.

Softening point and penetration of bitumen 90/130

Penetration grade bitumen supplied by iranrequest is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by iranrequest is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 90/130 has penetration between 90~130 desi-millimeter and softening point between 43~ 47C. The penetration grade bitumen 90/130 has a thermoplastic property which is like as synthetic resin material which gets softer with heating and hardens when cooled. This grade of bitumen 90/130 has very strong viscosity compare to other grades.

Guaranty|warranty of bitumen 90/130

iranrequest guaranty the quality of bitumen 90/130 with arrangement of international inspector to check quality and quantity of the bitumen during the loading to vessel and controlling the production by QC by batch test report before shipping. iranrequest guaranty the quality to meet with ASTM/EN 12591.

Specification of penetration bitumen 90/130

Bitumen 90/130

Specification

Test method

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

130/90

D-5

Softening point c

43/47

D-36

Ductility @25 c

100 min

D-113

Loss on heating(wt) %

0.2 Max

D-6

Drop in penetration after heating %

20 Max

D-6 D-5

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

 

Tags: , , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *